Agilent Technologies FieldFox N9913A User Manual

190 FieldFox User’s Guide
AC/DC adapter
To charge a battery inside the FieldFox, insert the AC/DC adapter plug into the
Power connector on the FieldFox side panel, then plug the adapter into an AC
outlet.
 FieldFox ON: Charging is indicated by a battery icon in the upper right of the
front panel screen.
 FieldFox OFF: Charging is indicated by the FieldFox power LED glowing
amber, with its intensity increasing from dim to bright every few seconds. This
pattern repeats until the LED turns off when charging is done. Learn more on
page 15.
Using the External Battery Charger (N9910X–872)
Important: Read the safety information for the External Charger on page 206.
External Battery Charger (N9910X–872)

Agilent Technologies FieldFox N9913A Specifications

General

Brand	Agilent Technologies
Model	FieldFox N9913A
Category	Measuring Instruments
Language	English