Akuvox R29 Series Administrator's Guide

R29X Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
157
NO.
Authorization
Mode
Description
1
None
No authentication is required for HTTP API as
it is only used for demo testing.
2
Normal
This mode is used by Akuvox developer only
3
WhiteList
If this mode is selected, you are only required
to fill in the IP address of the third party
device for the authentication. The whitelist is
suitable for operation in the LAN
4
Basic
If this mode is selected, you are required to fill
in the User name and the password for the
authentication.In Authorization field of HTTP
request header, use Base64 encode method to
encode of username and password.
5
Digest
Password encryption method, only supports
MD5. MD5( Message-Digest Algorithm)
In Authorization field of Http request header:
WWW-Authenticate:Digest
realm="HTTPAPI",qop="auth,auth-int",nonce="
xx", opaque="xx".
6
Token
This mode is used by Akuvox developer only

Akuvox R29 Series Specifications

General

Power	PoE or 12V DC
Operating System	Android
RS485	Yes
Wiegand	Yes
Installation	Wall-mounted
Tamper-proof	Yes
Processor	Quad-Core
RAM	2GB
Display	7-Inch LCD
Camera	2MP
Network	Ethernet
Integration	SIP, ONVIF
Light compensation	Yes
Ethernet	10/100M
PoE	802.3af
Operating Humidity	10% to 90% (non-condensing)
Storage	8GB
Protocols	SIP, ONVIF, RTSP