MM-400A
8. Operation Screens
8-102
(3) UNITS
Select the unit used for settings and display of external input from the
followings:
No unit / voltage V / force N, kgf, lbf / temperature °C, °F / air pressure Mpa,
bar, psi
(4) TRIGGER LEVEL
Set a trigger level (2.0 to 99.9%) as the percentage of full scale. An external
input is measured while it exceeds the trigger level.
Set it to 99.9% when performing measurement according to the current
measurement start.
(5) INITIAL MEASUREMENT
Select CURRENT START or EXTERNAL INPUT.
(6) Function keys
MENU: Touching this displays the MENU screen.
PREV: Touching this displays the EXTEND SETUP (6): EXTERNAL (1/2)
screen.
DIST: Touching this displays the EXTEND SETUP (1): DISPLACEMENT (1/3)
screen.
FORCE: Touching this displays the EXTEND SETUP (4): FORCE (1/2)
screen.
EXTERNAL: Touching this displays the EXTEND SETUP (6): EXTERNAL
(1/2) screen.
To Next Page
Loading...
