MM-400A
8. Operation Screens
8-120
40) BK CURR-L: Current lower limit error
Output if the currents (peak and RMS) fall below the lower limits. (Judgment
output is made during the current flow. The instrument continues the output
during the current flow, and then operates with the OUTPUT TIME setting in
the EXT INPUT/OUTPUT (4) screen.)
41) BK VOLT-U: Voltage upper limit error
Output if the voltages (peak and RMS) exceed the upper limits. (Judgment
output is made during the current flow. The instrument continues the output
during the current flow, and then operates with the OUTPUT TIME setting in
the EXT INPUT/OUTPUT (4) screen.)
42) BK VOLT-L: Voltage lower limit error
Output if the voltages (peak and RMS) fall below the lower limits. (Judgment
output is made during the current flow. The instrument continues the output
during the current flow, and then operates with the OUTPUT TIME setting in
the EXT INPUT/OUTPUT (4) screen.)
(Note) For item names of 3), 6) to 32), 37) to 38), and 43) to 63), refer to
“When NORMAL, NORMAL TRACE or SINGLE TRACE is set for MODE in the
SYSTEM SETUP (1) screen.”
(2) Function keys
MENU: Touching this displays the MENU screen.
NEXT: Touching this displays the EXT INPUT/OUTPUT (3) or (4) screen.
PREV: Touching this displays the EXT INPUT/OUTPUT (1) or (2) screen.
(Caution) In the judgment operation of displayed items DIST INITIAL, FORCE INITIAL and
EXT INITIAL in the VIEW screen, the output signals are different between the measurement
start by current, force or external trigger and measurement by external input (MEAS
BEFORE WELD).
DIST INITIAL FORCE INITIAL EXT INITIAL
Measurement start by
current, force or external
trigger
DIST NG
DIST U
DIST L
GOOD
FORCE NG
FORCE U
FORCE L
GOOD
EXT NG
EXT U
EXT L
GOOD
Measurement by
external input (MEAS
BEFORE WELD)
PREDIST NG
PREDIST U
PREDIST L
PRE GOOD
PREFORCE NG
PREFORCE U
PREFORCE L
PRE GOOD
PRE EXT NG
PRE EXT U
PRE EXT L
PRE GOOD
To Next Page
Loading...
