Amada WELD CHECKER MM-400A - Page 168

MM-400A
8. Operation Screens
8-128
p-2. COMMUNICATION (2) screen
(1) MODE
Select whether to use OFF, RS-232C, RS-485 or ETHERNET for
communication. Specify unidirectional or bidirectional communication system.
(2) ID NUMBER
Set an instrument number (1 to 31).
(3) SPEED
Select from 9,600 bps, 19,200 bps and 38,400 bps. Shown only when
RS-232C or RS-485 is selected for MODE.
(4) TCP/IP settings
When you have selected ETHERNET for MODE, set the following: IP address,
subnet mask, default gateway, and port number
Also, device MAC address is displayed.
PORT NUMBER can be set between 1024 and 5000.
(5)
(2)
(1)
(3)