Amada WELD CHECKER MM-400A - Page 294

MM-400A
12. Data Communication
12-73
External output 1 to 12 code table
Item
code
Item name
Item
code
Item name
Item
code
Item name
0 CURR NG 21 POWER ON 42 FL TIME-U
1 VOLT NG 22 READY 43 FL TIME-L
2 TIME NG 23 DIST LEV1 44 POWER-U
3 TIME TP NG *1 /
BK CURR NG *2
24 DIST LEV2 45 POWER-L
4 TIME TH NG *1 /
BK VOLT NG *2
25 DIST LEV3 46 RESIST-U
5 FL TIME NG 26 FORCE LEV1 47 RESIST-L
6 POWER NG 27 FORCE LEV2 48 DIST-U
7 RESIST NG 28 FORCE LEV3 49 DIST-L
8 DIST NG 29 EXT LEV1 50 FORCE-U
9 FORCE NG 30 EXT LEV2 51 FORCE-L
10 EXT NG 31 EXT LEV3 52 EXT-U
11 NO CURR 32 CURR-U 53 EXT-L
12 NG 33 CURR-L 54 NG-U
13 GOOD 34 VOLT-U 55 NG-L
14 PREDIST NG 35 VOLT-L 56 PREDIST U
15 PREFORCE NG 36 TIME-U 57 PREDIST L
16 PRE EXT NG 37 TIME-L 58 PREFORCE U
17 PRE GOOD 38 TIME TP-U *1 /
BK CURR-U *2
59 PREFORCE L
18 TROUBLE 39 TIME TP-L *1 /
BK CURR-L *2
60 PRE EXT U
19 SCH NG 40 TIME TH-U *1 /
BK VOLT-U *2
61 PRE EXT L
20 COUNT UP 41 TIME TH-L *1 /
BK VOLT-L *2
62 No setting
*1 Item names when NORMAL, NORMAL TRACE or SINGLE TRACE is set for MODE in
the SYSTEM SETUP (1) screen. (Refer to Chapter 8, “n-1 SYSTEM SETUP (1) Screen.”)
*2 Item names when SEAM is set for MODE in the SYSTEM SETUP (1) screen. (Refer to
Chapter 8, “n-1 SYSTEM SETUP (1) Screen.”)