Introduction to the New iStar
SECTION 2 - INTRODUCTION TO THE NEW iSTAR
2.1 - COMPONENTS OVERVIEW
THE MAIN COMPONENTS OF THE ANDOR NEW ISTAR SYSTEM ARE AS FOLLOWS:
iStar camera head (see Figure 1 below), which contains the following items:
CCD sensor with integrated drive and readout electronics
Thermoelectric cooling interface
Input & output connectors (including USB, triggering and gating signal monitoring)
1x USB 2.0 cable for connection to PC
Software in CD format (if ordered)
Figure 1: New iStar camera
To Next Page
Loading...