To Next Page

To Previous Page

Page 36

New iStar ICCD

3.4 - INSTALLING SOFTWARE AND USB DRIVERS

3.4.1 - Minimum Computer Requirements

• 3GHzQuadCoreor2.4GHzmulticoreprocessor

• 2GBRAM

• 100MBfreeharddisctoinstallsoftware(atleast1GBrecommendedfordataspooling)

• USB2.0HighSpeedHostControllercapableofsustainedrateof40MB/s

• Windows(XP,Vistaor7)orLinux

3.4.2 - Installing Solis Software and USB Driver

1. Terminate & exit any programmes which are running on the PC.

2. Insert the Andor Solis CD. The InstallShield Wizard should now start. If it does not start automatically, run the

le setup.exe directly from the CD.

3. Select appropriate location for installation of software and drivers on your computer / network.

4. When prompted, select New iStar as shown below.

5. Continue installation and restart your computer - when prompted - to successfully complete the installation.

6. The shortcut icon

for Solis will appear on the desktop on re-start.

7. The New iStar is now ready to be connected to a PC / laptop and powered on.

Installing the New iStar

Andor Technology New iStar User Manual

Questions and Answers: