Anser X1 - Figure 1-22. Add Object - Adjust Text Styles: Density, Stretching and Spacing

ANSER CODING INC. 23 X1 User Interface
STEP 4: In the Text Settings page, different styles are provided. Also, text Density can be changed to adjust the level of
ink used. Adjusting Stretching to customize the desired total length of the text. Spacing allows users to change the spaces
between each letter within a text. Please refer to the following figure for illustration.
Figure 1-22. Add Object – Adjust Text Styles: Density, Stretching and Spacing
Note: 1. The direction of stretching is the same as reading direction. Thus, in a 90-degree angled English text,
stretching over 100% will go down vertically instead of up.
2. Press the field Angle in the upper right corner of message editing page to key in the desired angle of
a selected text.
.