Anser X1 - Table 3-4. I;O Edit Settings - Logical Operand Definition; Table 3-5. I;O Edit Settings - Action List

ANSER CODING INC. 84 X1 Operation
Table 3-4. I/O Edit Settings – Logical Operand Definition
Parameter
Definition
AND
AND 
other words, it is the logical conjunction of the selected events.
OR
OR 
other words, it is the logical (inclusive) disjunction of the selected events.
XOR
XOR is a logica

exclusiveness of the selected events. (Exclusive disjunction.)
Please refer to the following table for the action that is triggered when events are true.
Table 3-5. I/O Edit Settings – Action List
Action
Definition
Print Job
- Print Stop: Stop production line.
- Print Start: Start production line.
- Purge: Enables pre-purge printhead settings.
- Reset Counter: Reset object message counters (item, box and lot).
Output
X1 alarm port (M8 6-pin). Please refer to X1 Technical Specifications V1.7.
- Alarm Green: Set the output pin #6 signal status.
- Alarm Yellow: Set the output pin #4 signal status.
- Alarm Red: Set the output pin #2 signal status.
- Alarm Buzzer: Set the output pin #5 signal status.
.