ANSER CODING INC. 72 X1 Printing Setup
A. General
- Station Delay:
When having two print stations (single stations) within the same production line, use the
to enable link station delay. Both station delay can be adjusted simultaneously.
The delay is applied in the next print.
- Print Direction: Set print direction in the print station. Setting is applied after two prints.
B. Counter: All the options found in this tab are applied after two prints.
- Message Counter: Reset to zero information display count and total count parameters.
- Object Counter: Reset to zero in the start value for the counter objects within a message.
C. Variable Input: Update one or multiple variable objects contained within the printing message. It is used when users
are only allowed to change parts of a message. Use together with changing the access level to achieve this purpose.
D. Database: After an excel file (.csv) is imported, select the row from which to start printing. This setting will be
applied after two prints.
To Next Page
Loading...
