Arbiter Systems 1084A User Manual

Appendix C
Options List
C.1 Introduction
Each Arbiter Model 1084A/B/C Satellite-Controlled Clock has a number of standard options that
may be installed for special purposes. This section is devoted to these options, and provides
supplemental and detailed information for operation and configuration of these options. While
many of these options apply to other clock models than the Model 1084A/B/C, references to these
models will be found throughout this document.
Additionally, there will be references to certain capabilities and specifications that apply only to
specific clock models when using these options. For example, with Option 03, there will be a large
list of possible signals that can be selected with the option board jumpers. Some of these signals
do not apply to the Model 1084A/B/C series clocks because the signals do not originate on the
main clock board. The key to usage is to check the basic specification of the clock to determine
the option capability.

Arbiter Systems 1084A Specifications

General

Brand	Arbiter Systems
Model	1084A
Category	Clock
Language	English