Arbiter Systems 1084A - Set IRIG Time Data; IRIG-B Time Data Setup

46 The Setup Menus
6.8 Set IRIG Time Data
Use the “Set IRIG Time Data” menu to adjust the time zone for IRIG-B Time Data between your
locale and UTC, and to turn ON or OFF the IEEE-1344 extension. The IEEE-1344 extension
controls some additional information contained in the IRIG-B time code (see Section 7.3.3). RS-
232C: see Section 9.2.6.
Figure 6.16: IRIG-B Time Data Setup