30 The Setup Menus
6.1 Setup Menus
No. Setup Menus Setup Items
1 Main RS-232C Main RS-232C Port Parameters and Broadcast
2 Local Hour & DST Set Local Offset, Daylight Saving mode
3 Out Of Lock Set Time Interval Before Alarm
4 Backlight Set to ON, OFF or AUTO
5 System Delays Set Timing Delay in Nanoseconds
6 Programmable Pulse Set Mode, Pulse Width and Time Zone
7 IRIG-B Time Data Set IRIG-B Time Zone and IEEE-1344
8 Event/Deviation Set for Event, or 1–PPS Deviation
9 Set Auto Survey Set Survey mode
10 Position Hold Set ON or OFF
11 Option Control Set Main board and Aux. board options
Table 6.1: Front-Panel Setup Menus
6.1.1 To Begin Configuring
Press the SETUP key to enter the clock configuration menus, starting with communication port
parameters (Set Main RS-232?).
SETUP: Press the Setup key repeatedly to scroll through the main menus. Also, after pressing
SETUP once, you can press the UP or DOWN keys to scroll the menus. In numeric data entry
mode, press SETUP to move the cursor to the left.
ENTER: Press the Enter key to confirm changes made within SETUP menus. Generally, pressing
ENTER also advances the next parameter, or returns to the previous menu level. In numeric data
entry mode, press ENTER to move the cursor to the right.
UP: Press the UP key, within the SETUP menus, to adjust numerical values upward, or to scroll
upward through the available menu choices. The UP key also assists in navigating through main
Setup Menus in normal order.
DOWN: Press the DOWN key, within the SETUP menu, to adjust numerical values downward, or
to scroll downward through available menu choices. Also assists in navigating through main Setup
menus in reverse order.
To Next Page
Loading...
Need help?
General