Arbiter Systems 1084A - Prog Pulse, Seconds-Per-Pulse Mode; Seconds-Per-Pulse Setup

40 The Setup Menus
6.7.2 Prog Pulse, Seconds–Per–Pulse Mode
Use the Seconds–Per–Pulse mode to generate a pulse every X number of seconds, from 1 to 60,000
seconds, and a Pulse Width of from 10 milliseconds to 600 seconds. Refer to Section 6.7 above for
additional detail on the programmable pulse mode. RS-232C: see Section 9.2.10.
Figure 6.10: Seconds–Per–Pulse Setup