Arbiter Systems 1084A User Manual

6.7 Set Programmable Pulse Mode 43
6.7.5 Prog Pulse, Single Trigger
Use the Single-Trigger mode to generate a pulse once per year at the specified Julian day, hour,
minute, second and fractional seconds. For reference, many calendars indicate the Julian Day.
Refer to Section 6.7 above for additional detail on the programmable pulse mode, and entering
numerical values. RS-232C: see Section 9.2.10.
Figure 6.13: Single Trigger Setup

Arbiter Systems 1084A Specifications

General

Brand	Arbiter Systems
Model	1084A
Category	Clock
Language	English