i2000SR interface module Service Manual
Page 124 of 212 625798100.APS.5.doc
STEPS REFERENCES
12 Raise the Lane 1 & 2 belts to replace
Lane 1 & 2 motor belt group or raise
Lane 3 & 4 belts to replace Lane 3 &
4 motor belt group.
This operation allows you to access
the two motor belt group fixing
screws.
Remove them to replace the motor
belt group.
13 Remove the motor belt group by
pulling it up.
14 Replace the belt group and
reassemble by performing the above
steps in reverse order.
To Next Page
Loading...