i2000SR interface module Service Manual
Page 88 of 212 625798100.APS.5.doc
Replacement Procedures
This chapter describes the procedures to execute the removal and
replacement operations required to keep the Workcell in efficient
working condition and to verify it is operating correctly.
Replacement of i2000SR IM
REPLACEMENT PROCEDURE SCHEDULE no. 1
Operation:
i2000SR IM replacement
Working area: i2000SR IM Mechanical Group: 625.100.00X
Electrical Group: 625.800.00X Part no. 625.100.00X
Machine Status: Controlled shutdown and power disconnected
Skill Required: 2-FSE’s (Field Service Engineers)
Time Required: TBD (To Be Determined)
Special Tools Required: None
Activity Type: Setting Control Cleaning ; Replacement
Intervention kind: ; Electrical ; Mechanical Fluidic ; Pneumatic
Daily Weekly Monthly
Quarterly Half yearly Yearly
Two-year After signalizing ; Because of failure
Frequency:
When necessary
To Next Page
Loading...