i2000SR interface module Service Manual
Page 4 of 212 625798100.APS.5.doc
Overview
Identification Data
Module name: i2000SR Interface Module (i2000SR IM)
Group Drawing no.: 625.100.00X
Pneumatic layout: 625.107.00X
Electrical layout: 625.800.00X
Warnings Concerning Safety
WARNING: Potential Biohazard
Identifies an activity or area where potentially infectious
material may be present. Refer to your applicable
laboratory procedures and to “Section 4 - Hazards and
Warnings” of the Accelerator Service Manual
WARNING: Electrical Shock Hazard
Field Service Engineer (FSE) may be exposed to electrical
shock hazards if engineering controls are not observed.
Turn off the power to the Workcell and disconnect the
electrical main before replacing fuses, working on motors,
switches, connectors, electric wires or other electrical
devices.
CAUTION: Lifting Hazard
Identifies an activity that may require lifting or moving a
heavy object. Obtain assistance when moving or using an
appropriate lifting device.
CAUTION: Moving Parts
The safety cover protection is not guaranteed if the
security devices are removed or bypassed. Use caution to
prevent injury caused by moving parts.
To Next Page
Loading...