31
Getting started
By default, the ear pad on the neck band is positioned to be worn on the
right ear.
To attach the headset to the neck band:
1. Make sure there is no headset attachment, except the earbud, connected
to the headset.
2. Insert the earpiece into the loop of the ear pad.
3. Gently press the earpiece inward until it clicks into place.
4. Place the neck band around your neck and over your ears.
5. Adjust and rotate the angle of the headset until the microphone is pointing
towards your mouth.
Headset attachments
Behind the neck band
To Next Page
Loading...
