32
Getting started
To wear the headset on your le ear:
1. Remove the ear pad and supporting pad from the neck band by carefully
pulling them up through the stems at the end of the neck band.
2. Snap the socket of the ear pad into the stem at the le end of the neck
band. Snap the socket of the supporting pad into the stem at right end of
the neck band.
3. Follow Steps 1-5 in To attach the headset to the neck band on page 31.
Headset attachments
To remove the neck band from the headset:
Hold the headset with one hand and the ear pad with the other hand. Twist and
pull the headset until it separates from the ear pad.
Ear pad
Supporting
pad
To Next Page
Loading...
