27.Bearing and oil seal
1)Inspection
.Bearing
If jammed in operation or there are pits and
dammagd,replace it.
2)Inspection
.Oil seal
If damaged or worn replace it.
28.Circlip and washer
Inspection:
.Circlip
.Washer
If damaged loose,bent replace it.
29.Crankcase
1)Clean crankcase with soft agent completely
2)Clean all sealing surfaces and closing sur-
faces completely
3)Inspection:
.Crankcase
Cracks/damage,replace it.
.Oil trace
If jamed,blow with compressed air.
When replacing the crankcase be sure to re-
adjust the output gear washer.
Caution
- 176 -
To Next Page
Loading...
