Audi Q7 2007 - 19 - Cooling; Removing and Installing Parts of Cooling System

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
1 Removing and installing parts of cooling system
159
6
1 Removing and installing parts of
cooling system
♦ The cooling system is under pressure when the engine is
hot. If necessary, relieve pressure before commencing re-
pair work.
♦ Renew gaskets, seals and O-rings.
♦ Secure all hose connections with the correct type of hose
clips (same as original equipment) ⇒ Parts catalogue.
♦ The arrow markings on coolant pipes and on ends of hoses
must align.
19 – Cooling
WARNING!
Hot steam or hot coolant can escape when expansion tank
is opened; cover filler cap with cloth and open carefully.
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259