Audi Q7 2007 - 5.5 Crossmember, Removing and Installing

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
1 Removing and installing parts of cooling system
161
6
1.2 Draining and filling cooling system
Special tools and workshop
equipment required
♦ Adapter -V.A.G 1274/8-
♦ Drip tray for workshop
hoist -VAS 6208-
♦ Hose clip pliers
-V.A.G 1921-
♦ Cooling system charge
unit -VAS 6096-
♦ Refractometer -T10007-
Draining
Collect drained coolant in a clean container for re-use or dis-
posal.
– Open filler cap on coolant expansion tank.
– Unscrew bolts and remove front noise insulation -1-.
WARNING!
Hot steam or hot coolant can escape when expansion tank
is opened; cover filler cap with cloth and open carefully.
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259