Audi Q7 2007 - Removing and Installing Exhaust Manifold (Left-Side)

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 26 – Exhaust system
6
210
1.6 Removing and installing exhaust manifold
(left-side)
Special tools and workshop equipment required
♦ Hose clamps for hoses up to 25 mm Ø -3094-
Removing
– Carefully pull engine cover panel off four retaining pins one
after the other -arrows-.
– Remove air intake hose -arrows-.
Lay a cloth under the separating point to catch escaping hy-
draulic fluid.
– Clamp off hydraulic hose for power steering pump using a
hose clamp -3094-.
– Disconnect hydraulic hose -1- from power steering pump.
– Unscrew banjo bolt -2- and move pressure line to side.
– Remove exhauster pump ⇒ page 52.
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259