Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
1 Removing and installing parts of cooling system
169
6
– Unscrew bolts and take out coolant pump -arrow-.
Installing
Installation is carried out in the reverse order; note the follow-
ing:
– Clean sealing surface.
– Install poly V-belt ⇒ page 39.
– Fill cooling system ⇒ page 162.
Tightening torques
1.5 Removing and installing continued coolant
circulation pump -V51-
Special tools and workshop equipment required
♦ Hose clamps for hoses up to 25 mm Ø -3094-
♦ Hose clip pliers -V.A.G 1921-
Component Nm
Coolant pump to cylinder block 9
Poly V-belt pulley to coolant pump 22
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ:1398556747 电话:18218750259