Audi Q7 2007 Workshop Manual

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 19 – Cooling
6
168
♦ 2-hole pin wrench -3212-
Removing
– Drain off coolant ⇒ page 161.
– Carefully pull engine cover panel off four retaining pins one
after the other -arrows-.
Before removing, mark direction of rotation of poly V-belt with
chalk or felt-tipped pen. If the belt runs in the opposite direc-
tion when it is refitted, this can cause breakage.
– Slacken poly V-belt by swivelling tensioner in direction of
-arrow-, using a lever with TORX 60 bit.
– Remove poly V-belt from tensioning roller.
– Unbolt poly V-belt pulley from coolant pump -arrows-
(counterhold with 2-hole pin wrench -3212-.
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259

Audi Q7 2007 Specifications

General

Brand	Audi
Model	Q7 2007
Category	Automobile
Language	English