Audi Q7 2007 Workshop Manual

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
1 Removing and installing engine
21
6
– Unscrew bolts -1, 3, 4- securing heat shield for selector le-
ver cable.
Disregard -item 2-.
– Swivel heat shield slightly to the side.
– Pry ball head -2- of selector lever cable off selector shaft
lever -arrow- using removal lever -80-200-.
– Pull off securing clip -1- and remove selector lever cable
from gearbox.
Take care not to bend or kink selector lever cable.
– Lower engine/gearbox assembly.
– Pull out scissor-type assembly platform -VAS 6131- with
engine/gearbox assembly from beneath vehicle.
1.2 Separating engine and gearbox
Special tools and workshop equipment required
♦ Support bridge -30-211 A-
♦ Support set for Audi -VAS 6131/10-, supplementary set
-VAS 6131/12- and -VAS 6131/13-
♦ Adapter -T40058-
Procedure
• Engine/gearbox assembly removed and secured to scissor-
type assembly platform -VAS 6131-.
All cable ties which are released or cut open when removing
must be fitted in the same position when installing.
Note
Note
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259

Audi Q7 2007 Specifications

General

Brand	Audi
Model	Q7 2007
Category	Automobile
Language	English