Audi Q7 2007 - 7.5 Drive Axle, Bolted Inner Joint Overview

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 19 – Cooling
6
184
1.13 Removing and installing radiator
Special tools and workshop equipment required
♦ Hose clip pliers -V.A.G 1921-
Removing
– Drain off coolant ⇒ page 161.
– Remove radiator cowl ⇒ page 189.
– Carefully pull engine cover panel off four retaining pins one
after the other -arrows-.
– Unclip differential breather hose -1- from air cleaner hous-
ing (top section).
– Unplug electrical connector -3- at air mass meter -G70-.
– Detach air intake hose -4- from turbocharger.
– Release retaining clips -2- and detach top section of air
cleaner housing.
Component Nm
Coolant pipe to cylinder head 9
Bracket to cylinder head 9
Intake manifold flap motor -V157- to intake
manifold (bottom section)
9
Air pipe to engine lifting eye 9
Air pipe to bracket 9
Hose clips Width 9 mm 3
Width 13
mm
5.5
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259