Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
1 Technical data
1
6
1Technical data
1.1 Engine number
The engine code is also included on the vehicle data sticker.
The following steps are required to make the stamped engine
number visible.
– Carefully pull engine cover panel off four retaining pins one
after the other -arrows-.
Before removing, mark direction of rotation of poly V-belt with
chalk or felt-tipped pen. If the belt runs in the opposite direc-
tion when it is refitted, this can cause breakage.
– Slacken poly V-belt by swivelling tensioner in direction of
-arrow-, using a lever with TORX 60 bit.
– Remove poly V-belt from tensioning roller.
– Unscrew bolts -arrows- and detach idler roller from front
sealing flange.
00– Technical data
Note
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ:1398556747 电话:18218750259