Audi Q7 2007 - Removing and Installing Cylinder Head

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 15 – Cylinder head, valve gear
6
112
1.4 Removing and installing cylinder head
Special tools and workshop
equipment required
♦ Counterhold tool -3036-
(for cylinder head, left-
side)
♦ Puller -T10320- (for cyl-
inder head, left-side)
♦ Puller -T40064- (for cyl-
inder head, left-side)
Removing
– Drain off coolant ⇒ page 161.
Cylinder head (left-side):
– Remove toothed belt for high-pressure pump ⇒ page 48.
– Use puller -T40064- to pull off belt sprocket for high-pres-
sure pump.
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259