Audi Q7 2007 - Removing and Installing Camshafts

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
2 Servicing valve gear
123
6
2.4 Removing and installing camshafts
Special tools and workshop
equipment required
♦ Counterhold tool -3036-
♦ Puller -T10320-
♦ Camshaft insert tool
-T40094-
♦ Bracket -T40095-
♦ Tensioner -T40096-
♦ Electric drill with plastic
brush attachment
♦ Safety goggles
♦ Sealant ⇒ Parts cata-
logue
Removing
– Remove timing chain from camshaft ⇒ page 73 on rele-
vant cylinder bank.
Cylinder head (left-side):
– Remove intake manifold (top section) ⇒ Rep. Gr. 23.
– Remove toothed belt for high-pressure pump ⇒ page 48.
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259