Audi Q7 2007 - Removing and Installing Particulate Filter

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
1 Removing and installing parts of exhaust system
207
6
1.4 Removing and installing particulate filter
Removing
– Unscrew bolts and take off front noise insulation -1- and
rear noise insulation -2-.
– Unbolt bracket for noise insulation -arrows-.
To avoid any damage, the flexible joint at the starter catalytic
converter must not be bent more than 10
° .
– Disconnect exhaust system at clamp -arrow-.
– Unscrew temperature sender before particulate filter
-G506- -arrow-.
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259