Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
2 Servicing work on timing chain end
65
6
2.7 Removing and installing camshaft timing chains
Special tools and workshop
equipment required
♦ Locking pin -3242-
♦ Adapter -T40049-
♦ Locking pin -T40060-
(2x)
♦ Adapter -T40061-
♦ Adapter -T40062-
♦ Drill bit 3.3 mm ∅ (2x)
Removing
The crankshaft and camshafts must only be turned with the
chain drive mechanism fully installed. Otherwise the valves
may strike the pistons, causing damage to valves and piston
crowns.
– Remove timing chain covers ⇒ page 59.
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ:1398556747 电话:18218750259