Audi Q7 2007 - Page 72

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 13 – Crankshaft group
6
66
– Attach adapter -T40049- at rear end of crankshaft using
two old securing bolts for drive plate.
Ignore -arrow-.
♦ The locking pin -T40060- has a flat -2- which makes it eas-
ier to insert when the locating bores in the camshaft and
cylinder head are not exactly in line.
♦ The locking pin is inserted initially so that the side pin -1-
is perpendicular to the imaginary line between the locking
pin and the centre of the camshaft.
♦ To obtain the correct “TDC” position, the side pin -1- must
then be turned 90
° -arrow- so it is in line with the imaginary
line between the locking pin and the centre of the cam-
shaft.
– Turn crankshaft in normal direction of rotation to “TDC”
position:
• It should be possible to lock camshafts with locking pins
-T40060-.
• The side pin -arrow- in each locking pin -T40060- must be
in line with the imaginary line between the locking pin and
the centre of the camshaft.
Cylinder bank 1 (right-side):
Cylinder bank 2 (left-side):
Note
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259