Audi Q7 2007 - 3 Coil Spring Suspension Strut, Upper Control Arm, Mounting Bracket and Level Control System Sensor

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 13 – Crankshaft group
6
48
1.8 Removing and installing toothed belt for
high-pressure pump
Special tools and workshop equipment required
♦ Counterhold tool -3036-
♦ Adapter -T40058-
Removing
– Carefully pull engine cover panel off four retaining pins one
after the other -arrows-.
– Loosen clamps -arrows-.
– Pivot toothed belt cover forward and disengage retaining
pegs on bottom side of toothed belt cover.
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259