Audi Q7 2007 - Removing and Installing Cylinder Head Cover

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
1 Removing and installing cylinder head
107
6
1.3 Removing and installing cylinder head cover
Special tools and workshop
equipment required
♦ Torque wrench
-V.A.G 1331-
♦ Ratchet -V.A.G 1331/1-
♦ Tool insert, AF 19
-V.A.G 1331/5-
♦ Puller -T10055- with
adapter -T10055/1-
♦ Socket, 17 mm
-T40055-
Removing
The following description shows the removal and installation
of the left cylinder head cover. The procedure for the other
side is the same, except that some steps are not required.
– Disconnect vacuum hose going to vacuum reservoir -2-.
Disregard -item 1-.
Note
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259