Audi Q7 2007 - Removing and Installing Coolant Pipe (Left-Side)

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 19 – Cooling
6
174
1.9 Removing and installing coolant pipe (left-
side)
Special tools and workshop equipment required
♦ Hose clip pliers -V.A.G 1921-
♦ Drip tray for workshop hoist -VAS 6208-
Removing
– Remove power steering pump ⇒ Rep. Gr. 48.
– Remove air conditioner compressor ⇒ Rep. Gr. 87.
– Unplug electrical connector -3-.
– Remove bolts -1- and -2- and detach throttle valve module
-J338- from intake connecting pipe.
– Remove bolt -2- at guide tube for oil dipstick.
– Remove bolt -1- for poly V-belt tensioner.
– Open filler cap on coolant expansion tank.
WARNING!
Hot steam or hot coolant can escape when expansion tank
is opened; cover filler cap with cloth and open carefully.
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259