Audi Q7 2007 - Page 176

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 19 – Cooling
6
170
Removing
– Unscrew bolts and remove front noise insulation -1-.
– Unplug electrical connector -1- at continued coolant circu-
lation pump -V51-.
– Clamp off hoses -3- and -4- using hose clamps -3094- and
detach from continued coolant circulation pump -V51-.
– Unscrew bolt -2- and remove continued coolant circulation
pump -V51-.
Installing
Installation is carried out in the reverse order; note the follow-
ing:
Secure all hose connections with the correct type of hose
clips (same as original equipment) ⇒ Parts catalogue.
– Check coolant level ⇒ page 166.
Tightening torques
Component Nm
Bracket for continued coolant circulation
pump -V51- to longitudinal member
22
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259