Audi Q7 2007 Workshop Manual

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 10 – Removing and installing engine
6
12
– Pry off caps on windscreen wiper arms with a screwdriver.
– Unscrew nuts -1- and -3- several turns.
– Tilt windscreen wiper arms one by one and loosen from
wiper shafts.
– Remove nuts completely and take off wiper arms.
Use puller (commercially available) to remove wiper arm if
necessary.
– Pull off rubber seal -5- on plenum chamber covers.
– Detach plenum chamber covers -2- and -4-.
– Remove cover for electronics box in plenum chamber -ar-
rows-.
– Unplug electrical connectors -1 ... 3- at electronics box
connector point in plenum chamber.
– Move electrical wiring harness clear.
– Unscrew earth connection -2-.
– Remove engine control unit -1- ⇒ Rep. Gr. 23.
– Move clear wiring harness leading to engine.
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259

Audi Q7 2007 Specifications

General

Brand	Audi
Model	Q7 2007
Category	Automobile
Language	English