Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
1 Removing and installing parts of cooling system
179
6
– Set up support bracket -10-222 A- on wing panel flanges.
• The spindle is located at the front.
– Attach spindle of support bracket -10-222 A- to rear right
engine lifting eye.
– Take up weight of engine using spindle of support bracket.
– Unbolt earth connection -1- at longitudinal member (right-
side).
– Unscrew bolts and nuts -1 … 5- and lift off engine support
(right-side).
– Remove toothed belt for high-pressure pump ⇒ page 48.
– Use puller -T10320- to pull off toothed belt drive sprocket.
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
To Next Page
Loading...
