Audi Q7 2007 Workshop Manual

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 19 – Cooling
6
186
– Unscrew bolt -1- on rear of radiator.
– Press off retaining clips -2- and -3-.
– Detach ATF cooler -4- from radiator.
ATF hoses remain connected.
– Unscrew bolts -3- on rear of radiator.
– Press off retaining clips -2- and -4-.
– Detach air conditioner condenser -1- from radiator.
♦ Refrigerant lines remain connected.
♦ To prevent damage to the refrigerant lines, ensure that the
pipes and hoses are not stretched, kinked or bent.
– Lift out radiator from above.
Installing
Installation is carried out in the reverse order; note the follow-
ing:
♦ Hose connections and hoses for charge air system must be
free of oil and grease before assembly.
♦ Secure all hose connections with the correct type of hose
clips (same as original equipment) ⇒ Parts catalogue.
– Install radiator cowl ⇒ page 189.
– Fill cooling system ⇒ page 162.
The coolant in the entire system must be changed if the radi-
ator is renewed.
Tightening torques
Note
Note
Note
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259

Audi Q7 2007 Specifications

General

Brand	Audi
Model	Q7 2007
Category	Automobile
Language	English