Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
1 Removing and installing parts of exhaust system
203
6
" Tighten to 55 Nm
11 - Starter catalytic converter
" With flexible joint
" Do not bend flexible joint more than 10° - otherwise it can be damaged
" Protect against knocks and impact
" Removing and installing ⇒ page 204
" Stress-free alignment of exhaust system with cutting point ⇒ page 217
12 - 23 Nm
13 - 23 Nm
" Renew
14 - Gasket
" Renew
15 - Temperature sender before particulate filter -G506-
" Tighten to 45 Nm
" Coat thread with high-temperature paste; refer to ⇒ Parts catalogue
16 - Particulate filter
" Removing and installing ⇒ page 207
" After renewing particulate filter, perform adaption in “Guided Functions” ⇒ Vehicle diagnosis,
testing and information system VAS 5051
17 - Mounting
" Renew if damaged
18 - 23 Nm
19 - Mounting
" Renew if damaged
20 - 23 Nm
21 - Mounting
" Renew if damaged
22 - 23 Nm
23 - Tailpipe
" For left side of vehicle
" Renewing ⇒ page 204
24 - Rear silencer
" Stress-free alignment of exhaust system with cutting point ⇒ page 217
25 - Tailpipe
" For right side of vehicle
" Renewing ⇒ page 204
26 - Mounting
" Renew if damaged
27 - 23 Nm
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
To Next Page
Loading...
