Audi Q7 2007 - Page 220

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 26 – Exhaust system
6
214
– Unscrew nuts -arrows- and detach bracket for connector
from engine support (left-side).
– Unscrew bolts -1 … 3- and remove oil return pipe.
Shown in illustration with engine removed and intermediate
pipe detached.
– Unbolt intermediate pipe -arrows-.
Installing
Installation is carried out in the reverse order; note the follow-
ing:
Renew gaskets, seals and O-rings.
– Tighten bolts securing intermediate pipe to exhaust mani-
fold as follows:
1. Tighten with torque wrench initially to 10 Nm.
2. Tighten with torque wrench to 30 Nm.
3. Turn 90° (
1
/
4
turn) further using a rigid wrench.
– Install starter catalytic converter ⇒ page 204.
Tightening torques
Note
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259