Audi Q7 2007 Workshop Manual

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
1 Removing and installing engine
17
6
– Unbolt heat shield -A- from steering box.
– Remove bolt -B- securing universal joint ⇒ Rep. Gr. 48.
– Separate universal joint from steering box.
– Place used oil collection and extraction unit -V.A.G 1782-
under engine.
– Detach hydraulic line -1- going to cooler for power steering
at left of lock carrier.
Disregard -item 2-.
– Unscrew bolt -arrow- and move coolant pump for contin-
ued circulation -V51- clear to one side.
Observe rules for cleanliness when working on automatic
gearbox ⇒ Rep. Gr. 37.
– Unscrew bolt -arrow- and detach ATF pipes from ATF tem-
perature regulator.
Caution!
♦ Make sure that front wheels are in straight-ahead position
before removing universal joint from steering box.
♦ Do not alter position of steering wheel and steering box
(locate steering wheel with adhesive tape if necessary).
Note
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259

Audi Q7 2007 Specifications

General

Brand	Audi
Model	Q7 2007
Category	Automobile
Language	English