Audi Q7 2007 - Page 62

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 13 – Crankshaft group
6
56
♦ Oil seal extractor lever -T20143/2-
Procedure
• Engine/gearbox removed.
– Remove drive plate ⇒ page 54.
– Pry out the oil seal using the oil seal extractor lever
-T20143/2-.
– Modify assembly sleeve -T10122/2- by drilling an 8 mm ∅
hole -arrow 2- for the dowel sleeve.
– Use hole -arrow 1- in washer as a drilling template.
– Clean running surface and sealing surface.
– Fit assembly aid -T10122/1- onto assembly sleeve
-T10122/2- and slide oil seal -A- onto assembly sleeve.
– Take off assembly aid.
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259