445HD IP Phone
User's Manual 48 Document #: LTRT-14840
6.9 Configuring Location
This feature allows a called party to identify the geographical location of the calling party. For
example, if a caller in the U.S. makes an emergency call to E911, the feature extracts the caller's
information for the police department to immediately identify the caller's location.
The network administrator configures geographical location for each subnet (see the
Administrator's Manual). After you sign in, your geographical location is downloaded via inband
provisioning.
Note: If geographical location is not provisioned by the server, you're notified as shown in the
figure below.
Either Set the location manually, Skip (the popup closes but pops up every few hours), or
Dismiss ('kills' the notification).
To manually configure location:
Open the Location screen (MENU key > Settings > Location).
To Next Page
Loading...
