445HD IP Phone
User's Manual 64 Document #: LTRT-14840
4. Enter the number of the contact or select the contact from a directory.
5. Enter a Key Label – the name of the contact to be displayed on the sidecar.
6. Press the displayed Save softkey.
6.14.1 Configuring Pause Dialing for a Speed Dial to an Ext. behind an IVR
The 'Pause Dialing' feature creates a time break typically requried for a speed dial to a
destination extension number that is behind an Interactive Voice Response (IVR) system.
Note: Your network administrator will configure 'Pause Dialing' if you need to configure a
speed dial to a number behind an IVR system. See the Administrator's Manual for more
information.
6.14.2 Editing a Speed Dial
Editing a speed dial will usually be necessary if a contact's phone number changes.
To edit a speed dial:
1. Long-press the sidecar button next to the contact's speed dial and then Select.
2. In the 'Number' field of the Function Key screen, press the Clear softkey to delete digits.
3. Navigate to the 'Key Label' field and edit by pressing the Clear softkey to delete letters.
4. Save the edit.
6.14.3 Deleting a Speed Dial
Deleting a speed dial will typically be necessary if a contact leaves the company.
To delete a speed dial:
Long-press the sidecar button next to the speed dial to delete, navigate to 'Empty' and then
press the Select softkey.
To Next Page
Loading...
