445HD IP Phone
User's Manual 44 Document #: LTRT-14840
6.5 Activating Call Forwarding
Incoming calls can be automatically redirected to another phone number if (for example) the line
is busy. By default, call forward is deactivated.
To activate call forwarding:
1. Open the Automatic Forward screen (MENU key > Settings > Forward settings or press
the Forward softkey when the screen is in idle state).
2. To forward to voicemail: Navigate to and select Forward to Voice Mail and then Save; calls
will be redirected to voicemail.
3. To forward to a number: Navigate to and select Forward to a Number, enter the number
and then Save; calls will be redirected to that number.
6.6 Making Sure the NTP Server is Enabled
Date and time are automatically retrieved from the deployed Network Time Protocol (NTP) server.
Note: If the phone's 'NTP server' setting is set to 'Disabled', inform the network administrator.
Only the network administrator can change it. It must be set to 'Enabled' for date and time to
be automatically retrieved from the NTP server.
To make sure the NTP server is enabled:
1. Open the Date and Time screen (MENU key > Settings > Date and Time).
To Next Page
Loading...
