EasyManuals Logo
Home>AudioCodes>Gateway>MediaPack Series MP-11x

AudioCodes MediaPack Series MP-11x User Manual

AudioCodes MediaPack Series MP-11x
622 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #185 background imageLoading...
Page #185 background image
Version 6.6 185 MP-11x & MP-124
User's Manual 17. SIP Definitions
To register or un-register the device to a Proxy/Registrar:
Click the Register button to register.
Click Un-Register button to un-register.
Instead of registering the entire device, you can register specific entities as listed below by
using the Register button located on the page in which these entities are configured:
FXS/FXO endpoints - Endpoint Phone Number Table page (see Configuring Endpoint
Phone Numbers on page 203)
Accounts - Account table (see 'Configuring Account Table' on page 181)
Click the Proxy Set Table button to Open the Proxy Sets Table page to configure
groups of proxy addresses. Alternatively, you can open this page from the Proxy Sets
Table page item (see 'Configuring Proxy Sets Table' on page 176 for a description of this
page).
17.3.1 SIP Message Authentication Example
The device supports basic and digest (MD5) authentication types, according to SIP RFC
3261 standard. A proxy server might require authentication before forwarding an INVITE
message. A Registrar/Proxy server may also require authentication for client registration. A
proxy replies to an unauthenticated INVITE with a 407 Proxy Authorization Required
response, containing a Proxy-Authenticate header with the form of the challenge. After
sending an ACK for the 407, the user agent can then re-send the INVITE with a Proxy-
Authorization header containing the credentials.
User agents, Redirect or Registrar servers typically use the SIP 401 Unauthorized
response to challenge authentication containing a WWW-Authenticate header, and expect
the re-INVITE to contain an Authorization header.
The following example shows the Digest Authentication procedure, including computation
of user agent credentials:
1. The REGISTER request is sent to a Registrar/Proxy server for registration:
REGISTER sip:10.2.2.222 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.200
From: <sip: 122@10.1.1.200>;tag=1c17940
To: <sip: 122@10.1.1.200>
Call-ID: 634293194@10.1.1.200
User-Agent: Sip-Gateway/MediaPack/v.6.60.010.006
CSeq: 1 REGISTER
Contact: sip:122@10.1.1.200:
Expires:3600
2. Upon receipt of this request, the Registrar/Proxy returns a 401 Unauthorized
response:
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 10.2.1.200
From: <sip:122@10.2.2.222 >;tag=1c17940
To: <sip:122@10.2.2.222 >
Call-ID: 634293194@10.1.1.200
Cseq: 1 REGISTER
Date: Mon, 30 Jul 2012 15:33:54 GMT
Server: Columbia-SIP-Server/1.17
Content-Length: 0
WWW-Authenticate: Digest realm="audiocodes.com",
nonce="11432d6bce58ddf02e3b5e1c77c010d2",
stale=FALSE,
algorithm=MD5
3. According to the sub-header present in the WWW-Authenticate header, the correct

Table of Contents

Other manuals for AudioCodes MediaPack Series MP-11x

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes MediaPack Series MP-11x and is the answer not in the manual?

AudioCodes MediaPack Series MP-11x Specifications

General IconGeneral
BrandAudioCodes
ModelMediaPack Series MP-11x
CategoryGateway
LanguageEnglish

Related product manuals